Pentons and others for sale (update 6-19-15)

[slvrbrdfxr]

Hi all,
I'd like to sell a few of my bikes to fund another project that I'm undertaking. I'll be adding a couple more bikes in the coming days so please check back. All of them are located in the Tulsa, OK area. To email me direct just use my screen name here follow by @cox.net  
Thanks for looking !!
Dave McCullough

For sale: 1974 Penton 250 Harescrambler  with a complete enduro kit.  John Penton's signature on the gas tank. Frame #  40170757 Engine #  4-5402603 engine clock reads 10/73. This machine was disassembled and refurbished a few years ago and since then has been stored indoors and seen very light use as a pit bike. No engine work was done during refurbishment because it ran fine before I started this project. The forks seals/dust wipers/fork oil were replaced, Boge rear shocks were rebuilt, petcocks rebuilt, new rear fender, new seat cover, new control cables, new Magura grips, new air filter element, new gas tank decals, and new aluminum chainguard installed. Tires fair and chain/sprockets are in good shape. Bike runs/shifts great and is in nice condition. The lights and speedo work great too. I'd be glad to answer any questions and send additional pictures if needed so just send me an email.  I can deliver this bike to the AHRMA XC in New Blaine, AR weekend of May 9-10, 2105 with a deposit paid in advance. Asking price is $2850.
 
https://www.dropbox.com/s/zwbj5863bz1d7rz/74-250HS-29.JPG?dl=0
https://www.dropbox.com/s/w9cgkst1hb9jibx/74-250HS-32.JPG?dl=0

For Sale: 1977 Penton  400 GS6.  Frame # 701 00942 Engine # 7-5505089 engine clock reads 12/76. This bike has received a complete restoration which was finished in June of 2014 and was on display at VMD Mid Ohio in July 2014. The engine was completely rebuilt including all new oil seals/main bearings/gaskets, new connecting rod/rod bearing/pin, fresh bore with 1st o/s NOS Penton piston kit and NOS fiber clutch plates. It's equipped with a 38mm Lectron carb and also still has the operational OEM decompression valve threaded in to the rear of the cylinder. The ignition is a Motoplat which was converted to 12v and rewound by Vance Smith. Bike overhaul included new fork seals/dust wipers/fork oil, Marzocchi piggyback shocks rebuilt, new Bridgestone tires on front/rear, new seat cover, new front/rear fenders, new tail light assembly, new air filter element, new control cables, new Magura grips/levers, new Windsor  plastic gas tank/petcocks, new fiberglass side number plates painted to match, new gas tank decals, new gas tank leather strap, NOS Preston Petty front headlight/numberplate assembly, new front/rear sprockets, new o-ring chain, plastic media blasted then repainted front and rear wheel hubs/brake plates, new wheel bearing front/rear and all hardware including spokes received  electroless nickle re-plating. The original exhaust was custom fitted with a Krizman silencer/ spark arrestor assembly. This bike runs/shifts great and is very nice condition.  I'd be glad to answer any questions or send additional pictures if needed so just send me an email. Asking price is $4450 and I will consider any reasonable offer. I will have this bike for sale at Mid Ohio unless sold before I leave. Swapmeet spaces 50 and 59 which are directly across from the Penton Owner's Group tent.

https://www.dropbox.com/s/xm186p2wex7zsxr/Photo%20Jan%2001%2C%2012%2000%2059%20AM.jpg?dl=0
https://www.dropbox.com/s/2tpmaej3o7rmpn5/Photo%20Jan%2001%2C%2012%2005%2001%20AM.jpg?dl=0

For Sale: 1986 Yamaha IT200 with Missouri title. Frame # JYA1TY002GA016467 Engine # 43G-018328. It was completely disassembled and refurbished in 2012 and since then has been stored indoors and seen very little use as a pit cruiser. Engine was completely rebuilt including new oil seals/main bearings/gaskets, new connecting rod/rod bearing/pin, fresh bore with a new Wiseco 2nd o/s piston kit. Carb was overhauled including new fuel inlet needle/seat and new Boyeson Power reeds installed. Bike overhaul included new fork seals/fork oil/rubber dust gaiters, new front/rear fenders, new seat cover, new tool bag on rear fender, petcock overhaul, new yellow number plate backgrounds,  New front brake cable, new levers, new grips, new handlebar crossbar pad, new bark busters, new air filter element, new front/rear wheel bearings, new upper/lower shock mounting bearings/seals, new trip odometer cable and all hardware received electroless nickel re-plating. Dunlop 756 tires and chain/sprockets are in good shape. Rear suspension linkage/swingarm bearings were inspected and repacked with fresh grease. This bike has had the OEM front disc brake system removed and was retrofitted with 1984/85 IT200 lower fork legs and front drum brakes to make it legal for competition in AHRMA vintage events. The front/rear wheel assemblies are also from a 1984/85 IT200 which have plain aluminum rims instead of the gold anodized rims used on the 1986 IT200. This bike runs/shifts great and the trip odometer works great as well.  I'd be glad to answer any questions or send additional pictures if needed so just email me. I built this bike to use as a back-up bike when I go to the ISDT RR's so it's ready to go vintage racing. Asking price is $2350 and I will consider any reasonable offer. I will have this bike for sale at Mid Ohio unless sold before I leave. Swapmeet spaces 50 and 59 which are directly across from the Penton Owner's Group tent.

https://www.dropbox.com/s/iytgjr9qrns5daa/Photo%20Apr%2025%2C%207%2039%2008%20PM.jpg?dl=0
https://www.dropbox.com/s/9f0x1j5joj3jbiq/Photo%20Apr%2025%2C%207%2039%2047%20PM.jpg?dl=0

Posting for a friend so please use contact info posted in this ad. For sale: 1979 Husky 390WR in good condition. Price is $1450, Location is just south of Pittsburgh, PA. Seller is a former Husky dealer, Charlie Stewart, phone between 10AM and 7PM, 724-746-2282 or cell 412-298-9480. Thanks for looking !

https://www.dropbox.com/s/ync2kdkvkd0quuh/IMGP0740.jpeg?dl=0
https://www.dropbox.com/s/9pf2o0v5upmzxfx/IMGP0741.jpeg?dl=0
https://www.dropbox.com/s/vp0qcxq5mqtu5i9/IMGP0742.jpeg?dl=0
https://www.dropbox.com/s/mbndl2unatgp3p0/IMGP0745.jpeg?dl=0

[454MRW]

Now those are some nicely done bikes, well worth higher than average values! Mike

Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1980 KTM 175-400'S
1975 Can Am 175 TNT & 77 250 Black Widow
1979 Husqvarna OR390
1976-78 RM & 77-79 PE Suzuki's
1974 CR250M 07 CR125R 79 CR250R

[slvrbrdfxr]

Hi all,
Just a quick update to say that I've taken a deposit for the 74 250 Harescrambler and so its off the market. If the seller does not follow through I'll relist it here. Other 2 bikes are still available. Thanks for looking.
Dave McC

[firstturn]

I have bought several bikes from Dave in the past and they were all nice bikes and Dave does nice work.

Ron Carbaugh

[slvrbrdfxr]

Mike and Ron,
Thank you for the positive feedback. I appreciate it very much.
Dave McC

[slvrbrdfxr]

Hi all,
The 77 Penton 400 GS6 and the 86 Yamaha IT200 are still for sale and I've lowered the price on each in the description above. Will consider a reasonable offer on either bike as I need the money to pursue my dream of building a nice detached garage to get some much needed work space. I plan to have both bikes on display for sale at Mid Ohio this year unless sold locally before I leave. The 79 Husky 390WR listed above has been sold. Thanks for looking.
Dave McCullough

P.S. I'm also going to placing my very rare 1986 Suzuki RG500 Gamma up for sale on eBay real soon in case someone here has an interest. This bike steals the show wherever I take it and never fails to exhilarate my heart when twisting the throttle. A truly awesome motorcycle to say the least !!

[Rocket]

Dave
Send me some pictures of the Suzuki, I have a close friend who has a museum that may be interested. [email protected]
thanks
Rod G

[slvrbrdfxr]

Hi Rod,
Sent a few pics your way and attached a couple links below for others to view as well. Let me know. Thanks !!
Dave McC

https://www.dropbox.com/s/jphdwj9swe2ap0l/Gamma-12.JPG?dl=0
https://www.dropbox.com/s/fr5t3h08geszbu2/Gamma-1.JPG?https://www.dropbox.com/s/dl3any0nesya605/RGparts-1.JPG?dl=0
https://www.dropbox.com/s/6peod8ceg6dt56c/RGparts-14.JPG?dl=0

[slvrbrdfxr]

Hi all,
Just a quick update to say that the 250 Harescrambler , 400 GS6 and the IT200 have now all been sold. Still debating on selling the Suzuki RG500.
Dave McCullough