1975 CZ Falta Frame, Off Brand

[Kip Kern]

Still looking for the above.  No powder coating please and thanks in advance!

[firstturn]

Still looking Kip.  I have a place in West Texas, but the guy doesn't know or can't identify what he has in frames.  I will see when he is going to back at his ranch and run over and check it out.


Ron Carbaugh

[VICTOR MONZ]

Kip,

Have you checked with Charlie Richardson, "CR Performance", Fallbrook, CA, if there is one out this way he'll know.  I need to contact him about my '73 250 CZ and could research if you like.

Victor

[Kip Kern]

Thanks Ron and Victor for the help. Victor, yes if you don't mind, ask Charlie thanks!

[Mike Korgan]

Kip, I called Charlie already, he said he didn't have anything that wasn't modified.
Mike

[Kip Kern]

Thanks Mike:)

[clayman]

Hi Kip,

You might try Robert Borg AKA "Bob's Vintage Products" in Utah. He has a large amount of CZ inventory. Would a '74 red frame work or do you specifically need the '75 and later "Falta" frame? Hope all is going well with you.

Clay

[Kip Kern]

Clay  I need a 75 Falta for a museum restoration, will try Bob, thanks!

[VICTOR MONZ]

Kip.

There is a fellow in San Clemente, CA who had a 100% first class CZ 400 Falta, he is very precise about his machines and a class guy, I am not sure if he is active, his name is John Lambert.  He won the Elsinore Grand Prix in about 2004-5, vintage class of course on the bike. I bought a Six Day from him, in pieces, about 8 years ago and it was probably the fastest and best handling bike I've had.

I will ask about him this weekend at Glen Helen, as we are kicking off our Fall MX series.

I have a nice 73/74 CZ 250 red frame, fresh motor, with an up pipe available if there is interest.

Hope this helps.

Victor