Need L/R frame to motor braces

[Rich Fredette]

Hi again. 72 175JP. My resto project doesn't have either side and looks like all my www searching coming up negative for replacements. Can any fellow 175 owner tell me the tube diameter? I will have to get both bent up out of raw stock. Thx.

[Paul Danik]

Rich,

   I may have a set of those if you want a used set instead of making a set. I was looking for some other items the other night and I am pretty sure I saw a set. If you want me to look let me know.

[email protected]

Paul

[Rich Fredette]

Please do. That would be great, cosmetics not critical, sand and spray to follow.

[Paul Danik]

Rick,

   I found a set and would like to send you pictures, please send me an email at [email protected]  if you still need the braces.

Thanks
Paul

[Paul Danik]

The set of braces that I have are not the correct ones, as Rich and I have determined from the photos and further research. I may find a correct set, but then again I may not. If anyone else has a set please don't hesitate to step up. The needed ones are shaped a bit like a hockey stick, mine are straight... always more to learn.....

Paul

[Keith Meatyard]

Roberto has the correct braces for 72 and 73 JP.
http://www.ebay.com/itm/NEW-1973-1974-PENTON-KTM-GS-MC-175-ENGINE-STAY-BRACKETS-MOTOR-MOUNTS-BAR-ANCHORS-/271832121875?hash=item3f4a750213:g:ExkAAOSwBLlVJGRl&vxp=mtr

Keith Meatyard

[gooddirt]

I might have them , will take a look.

[Rich Fredette]

Very impressed by every item I see from that Italy-based mfg. source, amazing quality. I'll see if anyone digs up a used set and see what works budget-wise.

[454MRW]

Roberto Pettinato (Parmabike) is a stand up guy that provides top quality acurate reproduction parts, and offers 10% discount for direct contact purchases for POG members. His email is: parmabike at yahoo.com  Mike

Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Pentons-1978-1979 MX-6 175 & 250 KTM's
1976-78 125-400 RM's & 79 PE250 Suzuki & 2012 DR650
2007 CR125R Honda
1977 MC250 Maico

[Rich Fredette]

Roberto emailed back to me, he is currently in Italy and is planning on bringing additional restoration items back from the metal fab mfg. in mid-April. Nice guy, Italy...wishingI was there.