Order form - CMF exhaust pipes - Jackpiner.

Started by Dale Fisher, October 19, 2017, 08:22:14 AM

Previous topic - Next topic

Dale Fisher

Looking to get your Berkshire or Six-Day spruced up for the 50th?  Have a restoration project with an exhaust that looks like a pancake or a sieve??

Fresh from the finest reproduction specialist in Italy is a possible solution [:p]  I still need to work on getting them individual packaged and a little clearer estimate on shipping costs.    

If these sell promptly an order for jackpiner 175cc exhaust pipes would be considered in the future.....

Complete ready to install exhaust for 1972/73 CMF Sachs 125cc (Cone spring held tail).  $549 plus shipping

Complete ready to install exhaust for 1974 CMF Sachs 125cc (Bolt on two opening stinger).  $549 plus shipping

1972/73 CMF Sachs 125cc Pipe shroud  $145 plus shipping

1974    CMF Sachs 125cc Pipe shroud  $145 plus shipping

Dale Fisher
Penton Owners Group - President/Memberships
POG Merchandise
Mudlark Registry
Facebook - Penton Owners Group - Administrator
Facebook - Cheney Racing Group - Administrator
Dale Fisher

Former POG President,
Memberships, and Merchandising - Retired
Mudlark Registry

Dale Fisher

I have and probably will not remove one from the shipping media for photographs [V]









Dale Fisher
Penton Owners Group - President/Memberships
POG Merchandise
Mudlark Registry
Facebook - Penton Owners Group - Administrator
Facebook - Cheney Racing Group - Administrator
Dale Fisher

Former POG President,
Memberships, and Merchandising - Retired
Mudlark Registry

skiracer

Very interesting!  Looks like great workmanship.

1976 MC 5 Original Owner
1976 Penton 175 XC
1985 20' Hi Point trailer
1976 250 MC5 Original Owner
1976 Penton 175 XC
1977 250 GS6
@flyracingusa

Dale Fisher

The 1972/73 shrouds have all been sold.

Dale Fisher
Penton Owners Group - President/Memberships
POG Merchandise
Mudlark Registry
Facebook - Penton Owners Group - Administrator
Facebook - Cheney Racing Group - Administrator
Dale Fisher

Former POG President,
Memberships, and Merchandising - Retired
Mudlark Registry

Dale Fisher

Looks like shipping is going to run $30 to $45 depending on your location.

Dale Fisher
Penton Owners Group - President/Memberships
POG Merchandise
Mudlark Registry
Facebook - Penton Owners Group - Administrator
Facebook - Cheney Racing Group - Administrator
Dale Fisher

Former POG President,
Memberships, and Merchandising - Retired
Mudlark Registry

firstturn

Dale received my pipes today....BEAUTIFUL!  How many '74 pipes do you have left?

Ron Carbaugh
Ron Carbaugh

Dale Fisher

Three shipments were delivered yesterday and I have been holding off listing them on Ebay until some feedback is received.  Currently, I have the following:

There has also been requests for three Jackpiner 175cc pipes if... we can move closer to the minimum order of ten.
 

3 - 1974  Complete exhausts (bolt on stinger with two openings)
4 - 72-73 Complete exhausts (spring and cone stinger)
2 - 1974  Shrouds  (shroud only with welded on bolt flanges)

Dale Fisher
Penton Owners Group - President/Memberships
POG Merchandise
Mudlark Registry
Facebook - Penton Owners Group - Administrator
Facebook - Cheney Racing Group - Administrator
Dale Fisher

Former POG President,
Memberships, and Merchandising - Retired
Mudlark Registry

Dale Fisher

Another happy customer :D

"The package arrived on Saturday.  The expansion chamber/pipe  looks absolutely beautiful.  This will look fantastic on my Berkshire, and  it will now  have the one of a kind classic Penton sound (it's a '74 and currently has the original two outlet pipe.)

Again, I can't thank you and the Penton Owners group for making this happen."

Thanks!!!


Dale Fisher
Penton Owners Group - President/Memberships
POG Merchandise
Mudlark Registry
Facebook - Penton Owners Group - Administrator
Facebook - Cheney Racing Group - Administrator
Dale Fisher

Former POG President,
Memberships, and Merchandising - Retired
Mudlark Registry

Cal Alexander

Received my pipe and shrouds on Saturday. They are absolutely perfect! Thanks Dale for getting these built. The new pipe and shrouds will definitely spruce up my Six Day and Berkshire fleet!
75 MC 250
75 Mint 400
74 Jackpiner
74 Hiro
74 Penda
73 Penton Trials
72 Six Day
72 Berkshire
70 Six Day
and a few others

Dale Fisher

All but one of the pipes have been delivered to their new owners and the response has been very positive.  When opening the last box two more shrouds were inside.  My remaining inventory consists of 1 - 71-73 Shroud and 2 - 74 Shrouds.  The '74 should fit the 175 Jackpiner but that is still unconfirmed.

I received a confirmation that the Jackpiner exhaust pipes "could" be produced with the minimum order of 10. Before I take another leap of faith and make another large financial commitment I'd like to see a few more serious in buying one. Note: I have requests for four currently. Alexander x 2 - Hall - Minor

Dale Fisher
Penton Owners Group - President/Memberships
POG Merchandise
Mudlark Registry
Facebook - Penton Owners Group - Administrator
Facebook - Cheney Racing Group - Administrator
Dale Fisher

Former POG President,
Memberships, and Merchandising - Retired
Mudlark Registry

David Brown

Dale, if it is still a consideration, I would very much like to get a new Jackpiner exhaust pipe. Chicago Jerry recently restored my engine.  
[email protected]

Kevin Karch

Hi Dale -

I'm a newbie here, but I wanted to throw hat into the ring for the reproduction Jackpiner pipes, too...  I'll definitely take one for my '72 should they become available.

Thanks,
Kevin Karch

Dale Fisher

I talked with Roberto (Parmabike) at VMD about placing another order for exhaust pipes. Under consideration are complete reproduction pipes for '72/73 100/125 Sachs engined bikes with cone tips, '74 bikes with two hole tip, and all 175 Jackpiners. Cost on last inquiry was approximately $575. Please contact me with interest.

Dale Fisher
Penton Owners Group - Memberships - POG Merchandise
Mudlark Registry
Facebook - Penton Owners Group - Administrator
Facebook - Cheney Racing Group - Administrator
Dale Fisher

Former POG President,
Memberships, and Merchandising - Retired
Mudlark Registry

454MRW

As mentioned in a previous post I also talked with Roberto about the possibility of ordering 77-78 GS-6 250 pipes, so Dale, do you think that you might be able to combine these in with the shipping if we can generate some orders? Mike

Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1974 250 HS Penton
1976 MC5 400
1978 KTM 78 GS6 250
L78-79 MX6 175-250 KTM's
1976-78 125-400 RM's
2007 CR125R Honda
1977 MC250 Maico
2017 KTM Freeride 250R
Michael R. Winter
I enjoy rebuilding and appreciating Pentons!
1976 Penton MC5 400
1977 KTM MC5 125
1978 KTM 78 GS6 250
L78-79 MX6 175-250 KTM\\\'s
1976-78 125-400 RM\\\'s
2007 CR125R Honda
1977 MC250 Maico
2017 KTM Freeride 250R

Dale Fisher

Understand the exhausts are made to order and a sufficient quantity is needed in each size to build them. Pillon did have a few odds and ends listed on Ebay Italy but I do not see any complete exhausts currently listed.  Previously Roberto has helped to facilitate the order and his brother handling packing and shipping the items from Italy.    Here is their menu [8)]




Dale Fisher
Penton Owners Group - Memberships - POG Merchandise
Mudlark Registry
Facebook - Penton Owners Group - Administrator
Facebook - Cheney Racing Group - Administrator
Dale Fisher

Former POG President,
Memberships, and Merchandising - Retired
Mudlark Registry