mc 5 vs GS

Started by skiracer, June 04, 2021, 12:21:48 PM

Previous topic - Next topic

skiracer

Can anyone tell me the differences between a 76 MC 5 and a 77 GS 250? I know the the GS has a high breather frame, but, what else is different, or the same?

1976 250 MC5 Original Owner
1976 Penton 175 XC
1976 250 MC5 Original Owner
1976 Penton 175 XC
1977 250 GS6
@flyracingusa

Steve Minor

As far as the motors go, 1st gear is locked out on MC5 but not on the GS6.
Steve Minor

Mike Schulz

The seats are different - different bases, the exhaust pipes are different, Gas tanks are different - wide tunnel under 77 250. Frame loop is different. Carbs could be different. Headlight is different. Wiring is different for tail light.

skiracer

Thanks for the info guys!  I guess I asked the wrong question. What I really want to know is if a center stand from a GS will fit a MC frame. Looking at photos, the swing arms look the same, so I'm thinking the lower portion of the frames are the same.... thoughts?

1976 250 MC5 Original Owner
1976 Penton 175 XC
1976 250 MC5 Original Owner
1976 Penton 175 XC
1977 250 GS6
@flyracingusa

Rain Man

Probably have to fabricate tabs for the frame and modify the center stand too!

Raymond
 Down East Pentons
Raymond
 Down East Pentons

skiracer

Thanks Ray!  If that is the case, I might as well build one from scratch....  I was hoping it was a bolt on deal.

Quotequote:Originally posted by Rain Man

Probably have to fabricate tabs for the frame and modify the center stand too!

Raymond
 Down East Pentons

1976 250 MC5 Original Owner
1976 Penton 175 XC
1976 250 MC5 Original Owner
1976 Penton 175 XC
1977 250 GS6
@flyracingusa

Brett Hershey

Ski racer can you post a picture of your 76 mc5?

skiracer

No but I can email one to you. It's too big a pain in the butt to post here.

Quotequote:Originally posted by Brett Hershey

Ski racer can you post a picture of your 76 mc5?

1976 250 MC5 Original Owner
1976 Penton 175 XC
1976 250 MC5 Original Owner
1976 Penton 175 XC
1977 250 GS6
@flyracingusa