MARZOCCHI or LEADING AXLE CERIANI FORKS WANTED

[Larry Perkins]

Looking for a nice set of 35mm or 38mm Marzocchi forks.  Complete or just legs as I have triples.  A complete set of 35mm Ceriani leading axle forks would work too.  If any need seals and such that is ok.  Will buy or have alot of stuff to trade.  Thanks for any leads or help.

Larry P

[skiracer]

Larry, I have a set of Ceriani's leading axle forks.  Sliders in excellent shape.....

1976 250 MC5 Original Owner
1976 Penton 175 XC

[Larry Perkins]

If axle pinches are not cracked would potentially buy or trade.  [email protected]

Thanks!

Larry P

[Daniel P. McEntee]

Axle pinches can be welded. I have successfully done that for a few friends of mine on the VINDURO list. Position the portion of the axle that it clamps in place, secure with the actual bolt, vee it out with a grinder, TIG weld in place. You can grind off the welds and polish them if desired, I guess. The legs I did were for race bikes and riders.
  Type at you later,
    Dan McEntee

[skiracer]

They are not.  Will send an email later today....

quote:Originally posted by Larry Perkins

If axle pinches are not cracked would potentially buy or trade.  [email protected]

Thanks!

Larry P

1976 250 MC5 Original Owner
1976 Penton 175 XC