MC5

[mah]

wanted- 1977 MC5, 125, 175, or 250.  any condition considered.

mah

 

[rcb]

quote:
wanted- 1977 MC5, 125, 175, or 250.  any condition considered.

mah

 

 

[rcb]

quote:
wanted- 1977 MC5, 125, 175, or 250.  any condition considered.

mah
I have a 175 mc5 I bought for a parts bike, it needs  a top end,(cylinder piston and head)chain guide, both side panels,air cleaner, controls and cables,and air box boot. The frame has been welded below the rear motor mount on the footpeg gusset and the swingarm pinch bolt bracket is broken ( needs welded). The rims are stright and true but spokes are rusty. The rear shocks are Fox shox in need of a rebuld (the ones with springs) I have the original cylinder .40 over,agresive porting job, 38mm mikuni carb, it looks to me like it ate a piston wrist pin needle bearing. The cylinder has a fair sized groove in it I don't know if it can be cleaned up and a over sized piston found.  The bike is located in NE.Ohio (Akron/Canton area) I can be reached at 330-882-9309 after 9:00PM or e-mail me at [email protected]