FORK SEAL SIZES

[penton117]

Hi Guys,

Does anyone know the O.D. on 32mm Cerrani fork seals from a 1972 six-day? Thanks in advance

 

[Randy Kirkbride]

penton 117,
Book says 42X32X7mm

 

[penton117]

Thanks Randy - The Poggers come through again!

 

[DKWRACER]

Fork seals in general can be had from Chicago Rawhide, hence the CR prefix on many a fork seal.....

 

[wayne huff]

Ok How about the seals on a 1976 175 cerriani
I havent removed them yet and I'm not sure ican read or measure them.
thanks
Wayne Huff
spring Creek Motorcycles

 

[Randy Kirkbride]

Wayne,
Book calls for 47X35X7 on a '75 175.  Anyone know if they are the same in '76?

 

[tomale]

I think my book has that information. I will look it up and let you know. It seems to me that I used honda seals from a 305 they were alot cheaper, but that was many moons ago.
I recently replaced the seals. It took two seals plus the boot per side. the smaller one must have been some kind of sweeper seal.
Also we use to cut felt and lay it on top of the seal and grease it to keep out dust and other unsightly things. The dust cover can only do so much.

Thom Green,I own and ride a 76 250 MC5 MX which I bought new.

[john durrill]

Guys ,
 Al has them in stock. Just give him a call and he will send you a set.
John