Wanted: Speedometer Hub Drive

[KJDonovan]

Greetings,

I am looking for a new or used speedometer hub drive
(PN 52.09.052.000) for a 72 Jack Piner.  Ratio is unimportant as I am having the speedometer rebuilt and it can be calibrated for the new drive.

Thanks,

KD


Kevin J. Donovan
Foster, Rhode Island
72 Jack Piner (My Ride)
72 Six Day (Wifes Ride)

[454MRW]

Kevin,
There is one on eBay right now. Mike http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1,1&item=4618439619&sspagename=STRK%3AMEWA%3AIT

Michael R. Winter
1974 250 Harescrambler
1975 250 HS Project
1977 250 MC5 Project
1978 250 MX6  
1979 250 KTM Project
1980 250 MX KTM

[KJDonovan]

Mike,

I am currently the high bidder on the one on eBay, but I figured I should put a post here too as I seem to always get beat out at the last minute there.  I am keeping my fingers crossed though!

Thanks,

KD

Kevin J. Donovan
Foster, Rhode Island
72 Jack Piner (My Ride)
72 Six Day (Wifes Ride)

[Dennis D]

Did you check with Al? I bought a new one for my Piner from him
a while back. Dennis D

[KJDonovan]

Dennis,

Thanks for the heads up on Al having these, as always I was beat out on Ebay, but phoned Al and he is sending me one.  One piece of information that Al did not have was the ratio on the ones he is selling.  Do you happen to remember the ratio on the one you purchased from him?  I need to figure this out so I can have my speedometer calibrated accordingly.

Thanks,

KD

Kevin J. Donovan
Foster, Rhode Island
72 Jack Piner (My Ride)
72 Six Day (Wifes Ride)

[Dennis D]

Who has time to look at the speedo anyway?? All I cared about was that the needle moved! LOL Actually I bought a spare from him also and I think they are the same. Numbers on this thing are 00/58/1 RH 4.78. HTH Dennis D