Wanted: Swingarm parts-Jackpiner

[pakala]

74.5-75 Penton Jackpiner 175
 Looking for swingarm bearing sleeve part#54.03.032.000 and Adjustment nut Part#54.03.034.000
 Side panels repop or NOS. Wire cable gas tank hold down.
Anyone use updated spring loaded footpegs that just bolt on?
                       Paul (socal)

[AndyL]

Paul,
I put a set of Al B's foot pegs on my 75 Jackpiner and love them.  The stock ones get a bit slick, but the replacements are just like modern pegs with an agressive "bite".  

I believe that I just re-used my old springs and they snap back in place after a fall just fine.

Andy
#14u MOVMX and AHRMA
75 Jackpiner
92 KTM 300
70 Steeltanker

[Chakka]

I also updated my footpegs with Al's replacements. A huge improvment!

Chris

[pketchum]

I bent two sets of stock foot pegs on my '79 KTM 250 and I only weigh 185 lb.  I decided to upgrade to Al's stainless steel footpegs and voila, no more bent foot pegs.  I love 'em and bought another pair for my other KTM.


Phil

[pakala]

Phast Phil,
 Can you dig around in Teddy's workshop and find me an old swingarm to pull some parts off???
  What about springs for the footpegs, my core bike had none?
                       Paul(socal)            

[AndyL]

pketchum Posted - 06/20/2006 : 1:57:24 PM
 I bent two sets of stock foot pegs on my '79 KTM 250 and I only weigh 185 lb.

I have two comments:[}:)]
1. On a good day, in your dreams, at one time, many moons ago.  Or;
2. Apparently, there is a gravitational anomaly in your subdivision in Lee's Summit, MO

Your friend,
Andy

Andy
#14u MOVMX and AHRMA
75 Jackpiner
92 KTM 300
70 Steeltanker