SACHS 100cc engine ID plate wanted

[Marc Biro]

Looking for a SACHS ID plate that reads; 100/5A. Will purchase outright or trade for?

Thanks

marc

[Dwight Rudder]

I need a 100/6B plate.  How would you rivet it back on ?
Dwight

Dwight Rudder
7 time ISDT / E medalist
8 time National Enduro Class Champion.

[john durrill]

Mark , Dwight
 Try the Hammers in Germany. They showed the plates and rivet's
 in-stock last time we asked.
http://www.motorrad-klassiker-ersatzteile.de/
 Or try the folks here. They should be able to tell you where to find them.
http://www.herculesig.de/
Dwight , Leo should know if anyone does.
John D.

[Marc Biro]

John,

Thanks. Will do.

marc

[Dwight Rudder]

Tried the Hammers.  They said they only have parts for the 125 and 180 5 speed engines ( Military ).
Dwight


Dwight Rudder
7 time ISDT / E medalist
8 time National Enduro Class Champion.

[Kip Kern]

There is a place in Ft Wayne IN that can make them, just have to justify the up front $$$$$$$.  Looking into having 14mm and 17mm Kick Starter shafts made now and that is big $$$$$$$$

[Marc Biro]

Hi Kip,

WHAT KIND OF MINIMUM IS REQUIRED AND WHAT IS THE PRICING, TIME FRAME, ETC?

ON THE BOTTOM OF THE 125CC ID PLATE I HAVE IN HAND, IT READS;

TYPE SACHS 1251/5A

WOULD THE TAG ON A 100CC SACHS READ;

TYPE SACHS 1001/5A OR TYPE SACHS 100/5A?

Thanks

Marc

[dkwkid]

You guys arn't planning on sandbagging the 100 class are you?

[firstturn]

Marc,
  It would be 1001/5A.......I found one.  You have email.

Ron Carbaugh

[Dwight Rudder]

Ron, Do you have a 100/6B plate or cover ?  My 100 has a 125 side plate for some reason.  Actually I have 2 100cc engines and BOTH have 125 side covers.  
Dwight



Dwight Rudder
7 time ISDT / E medalist
8 time National Enduro Class Champion.

[firstturn]

Dwight,
  I have several of the covers with the 1001/6B plates, but I hope to rebuild the engines someday and want to have the proper ID plate to go on the correct engine.  I had to buy the cover/ID plate that Marc wanted.

Ron Carbaugh