Allen Head, Cylinder Head Nuts

[Kip Kern]

Anyone out there in POG have any luck finding a jobber that carries the cylinder head allen nuts for the 76 up KTM engines?  I tried my sources but to no avail.  I know they are out there as I saw an engine with new manufactured (just can't remember who owned it!) Al is out.  Thanks in advance;)

[Mike Berrington]

Try McMaster Carr...I did not look but they have always amazed me with what they have ... crank shims, blue nylon lock nuts, rubber sheet for flaps etc....
http://www.mcmaster.com



Mike Berrington
Waynesboro VA.
73 Jackpiner, 77 GS6 175
88 YZ250,  03 YZ450F

[Steve Minor]

Kip....I don't know if they stock that size, but you might try this vendor too.

http://www.boltdepot.com/

Steve Minor
Wilmington, NC

[Kip Kern]

Thanks, I'll give em a try!

[Kip Kern]

No luck, will try out of country, possibly have a chance find.

[firstturn]

Kip,
  I do not have any setting around in a head...send the size and I will look in my used bolt bin.

Ron Carbaugh

[Kip Kern]

Ron,  32mm long, 10mm allen socket made by "Bauer" (8mm x 1.25 thread goes through the entire fastener).  I have an inquiry in Canada from a metric supplier (same place I found the 1mm x 16mm cotter keys for the clutch nuts).  May end up with 100 each but I think they would sell as these are hard/impossible to find.

[gooddirt]

Have deleted my last posting response [B)][B)]

[firstturn]

Kip,
  I found 4 32mm length with a 10mm allen head.  I also had some other head bolts in there.  I will ship them tomorrow priority mail.

Ron Carbaugh

[Kip Kern]

Let me know what I owe and I'll be happy to pay you bro!

Hopefully will be able to get these through Canada also;)

[Kip Kern]

Bad news, none in Canada.  Will try Germany/Austria next. Keep on truckin!

[firstturn]

As we say in Texas...bolts are in the mail.

Ron Carbaugh

[Kip Kern]

Ron, Received the allens today, thanks so much!:D