72 Jackpiner Kickshaft and lever

[imported_n/a]

I'm looking for a new or vgc kickstart shaft and kickstart lever for my black-engined '72 Jackpiner.  I ordered a parts book from Larry Perkins, but it hasn't come yet, so I'm blind as to part numbers.  I've come to y'all for assistance because ebay has two NOS kickstart levers, one Part No. 1.51.33.036.000, which, if my memory serves me, looks like the kickstarter that my silver-engined '74 Jackpiner had.  The other is Part No. 55.33.036.144, which looks to be a later part or for the 250 and 400.  As I REALLY NEED a kickstarter, is the 1.51.33.036.000 an appropriate part for my '72?  The trashed kicker I have now pivots at the top, whereas this NOS part pivots at the shaft.  Any help would be most appreciated.
Glenn

 

[OUCWBOY]

Glen,
My parts book for the black motor 175 calls for part number 51.33.021.000 for the shaft and part number 51.33.035.200 for the kickstarter hub with # 51.33.036.100 for the kick starter lever. There are about 6 other pieces that make up a complete kickstarter. My parts book dosn't show a complete kickstarter.
Hope this hleps some.
Donny

[OUCWBOY]

Glen,
I found the part number for the complete kickstarter assy it's 1.51.33.036.000 I have a 72 Jackpiner this type kickstarter on it and a 73 with the other type. I think both will work.
Donny

Edited by - oucwboy on 12/27/2001  12:02:45 PM

[Larry Perkins]

Glen

I have at the moment a NOS 175 kickstarter and a good used one.  Both are old style.  Call me or e-mail me.  They are not cheap but it is because they are hard to find.

 

[imported_n/a]

Thanks a lot for your help, guys.

Glenn