76 ktm 125 clutch side cover

[Doug Bridges]

I am in need of a clutch side cover for my 76 MC5 125. The previous owner must have lost a clutch nut at one time and the case is mangled from the inside and has a hair line crack that leaks. I thought I had found one on ebay that would work off of a 79 175
(I actually lost contol and bought the whole engine, it is a fixer upper, good winter project) but it didn't quite match up. If anyone has one I am in the market. If not I guess it will be a JB weld job.

Doug Bridges
76 MC5 125

[G Ellis]

The clutch cases are the same for a 175 and a 125.If it does not fit why wont it mach up. I have used this in the past. Later Gary

[Doug Bridges]

Hi Gary
Everything matches up except on the lower rear corner there is a hollow that is different. This is off of a 79 175. maybe I need to look for an earlier year. I wonder if a Jack Piner case would fit.

Doug Bridges
76 MC5 125

[Larry Perkins]

Jackpiner one will work.

Larry P

[Doug Bridges]

Thanks for the info Larry!
Anyone have a Jack Piner clutch case they are wiling to part with?

Doug Bridges
76 MC5 125