Messages

Planning on coming I will bring my 1974 Jackpiner and my 1974 250

I used 520 o ring on my 74 jackpiner and 250 and a 530 o ring on my 73 jackpiner I just cut the chain guide, they all work great no problems

I will be bringing my 1973 Jackpiner Enduro sorry Al not the 250 this year you can ride the 175 if you want see ya there W13

I will be there on a 1973 Jackpiner W13  Fastwillie

I will racing Friday on my Penton 250 and Saturday on my  74 Jackpiner

I paid $2400 for my 74 1/2 it was mostly done

Great time great food and great racing at White Lightening this year hey Al next year you can ride the 250 again thanks  for putting on a great event again and thank the sweeper for all there good work.

Heading to SC still have a couple of used seals still in the forks look for W13 or call me 330-774-4235 from 74 jackpiner

I will be there trying out my 1974 250, I hope it is warmer then Ohio.
W13

There is 2 rods and a ball they should measure 222mm, also there is 2 different thickness of friction plates the 250 has 8 steel and 7 friction, there is new style and old style.

If this a intake flange for a Sach  to to andre horvaths web site he has them

UPDATE:  Exhaust plugged up needs new fiberglass run like a new machine

sounds like fun I will be there I need all the practice I can get before I race Sunday in Pa.

the problem is the bike starts to blubber like it is running rich on hills and elevation changes tried different carb, different jet and float settings no change, replaced float n needled new pilot new needle and needle jet did not check timing or coil maybe next.

I will be racing at Davidsville Pa on the 27 great place to race w13