Messages

quote:Originally posted by tofriedel

quote:Originally posted by tofriedel

I have a Penton Steel Tanker Frame with code number of V6626.  My guess is that it is one of last few produced.

As you might expect, it is missing a lot of its parts.

The missing parts include - Front Forks, Front Wheel, Seat, Fuel Tank, Engine and Rear Tire and other smaller things.

I have had this for a few years and have decided that it is time to offer to anyone interested in my Steel Tanker.

If anyone is interested, I can deliver it to the York, PA next week Saturday & Sunday.

If anyone is interested you can send me an email and I will have it at York.  Email is tonyfriedel@aol.com and phone number is
410-375-4481.

I hope to see everyone at the York Event next week.

Tony

Tony

Tony

Tony

quote:Originally posted by tofriedel

I have a Penton Steel Tanker Frame with code number of V6626.  My guess is that it is one of last few produced.

As you might expect, it is missing a lot of its parts.

The missing parts include - Front Forks, Front Wheel, Seat, Fuel Tank, Engine and Rear Tire and other smaller things.

I have had this for a few years and have decided that it is time to offer to anyone interested in my Steel Tanker.

If anyone is interested, I can deliver it to the York, PA next week Saturday & Sunday.

If anyone is interested you can send me an email and I will have it at York.  Email is tonyfriedel@aol.com and phone number is
410-375-4481.

I hope to see everyone at the York Event next week.

Tony

Tony

Tony

I have a Penton Steel Tanker Frame with code number of V6626.  My guess is that it is one of last few produced.

As you might expect, it is missing a lot of its parts.

The missing parts include - Front Forks, Front Wheel, Seat, Fuel Tank, Engine and Rear Tire and other smaller things.

I have had this for a few years and have decided that it is time to offer to anyone interested in my Steel Tanker.

If anyone is interested, I can deliver it to the York, PA next week Saturday & Sunday.

If anyone is interested you can send me an email and I will have it at York.  Email is tonyfriedel@aol.com and phone number is
410-375-4481.

I hope to see everyone at the York Event next week.

Tony

Tony

Kip, I have a complete Steel Tanker rear wheel(hub and sprocket) and a Steel Tanker Frame that I would like to get rid of.  I could probably get you the spokes you need, but I would prefer to get the wheel gone.  The rim is rusted but the spokes are fine.

Tony Friedel

Tony

Merry Christmas to all of my friends and associates at Pentons Owners Group for 2016.

While I am at offering best wishes please have a HAPPY AND SAFE NEW YEARS.

Tony Friedel


Tony

Where are you located?

Thanks,



Tony

Howie,

Send me your email and or phone number, I have a friend who may have the bike you are looking for.  It is a 1969 ST in pretty good condition, a one kick starter.

The email system on this site is not working, so you have to contact me at tonyfriedel@aol.com

Tony

Tony

Jerry,

What youth size are you looking for.  My 15 year old grandson wears a size 15.

Tony

Kevin,

Most Bosch plugs for motorcycles that I am familiar with start with a W .  The nearest alternate plug to a W340S2S is an NGK B9EG.

A W340S2S plug was what came in 1982 KTM 250 MX bikes.  I can't remember the NGK plug I used in my 1981 KTM 495MX bike.

Tony

Neither does DIRT.

Tony

Carl,

There is a brand new center stand on eBay right now.  The seller is Parmabike.  If you cantact him directly he will give POG members a discount.

Here is the eBay site

http://www.ebay.com/itm/1971-1972-PENTON-KTM-GS-125-WITH-SACHS-MOTOR-FRAME-CENTER-STAND-KICK-ENDURO-/351366033139?hash=item51cf0c2ef3&vxp=mtr

Good luck

Tony

Carl, my 1973 manual does not show a center stand.  There may have been an after market stand available.  I have had 3 1973 125's, but none had a factory center stand.

Tony

Carl, my 1973 manual does not show a center stand.  There may have been an after market stand available.  I have had 3 1973 125's, but none had a factory center stand.

Tony

Victor,

You might want to give Gary Ellis a shout.  He has built a lot of Sacks and KTM motors for Trail riding, Enduro and Motocross.  His race bikes are solid competitors.

He is a Penton Owners Group Member, so he may be contacting you.

Regards,

Tony

Tony

Most riders were using the Preston Petty combo "Head Light/Number Plate".

Tony