Messages

Not trying to hijack this thread, but what options are available for aluminum rims? I am starting to look for a set for my 72 Jackpiner, and am confused by what I've read in other posts. I'll need a new set of rims and spokes to match. Thx.

72 Penton 175 Jackpiner
92 Suzuki DR350
72 Honda CT70
71 Honda CT70H
70 Honda CT70H

quote:Originally posted by Denis Jeffries

Doug,
 I have a '73 jackpiner and I replaced the bing with a mikuni.Makes starting a lot easier. I bought it from sudco, came prejetted and ready to bolt on,nice.
 Denis

Denis
Would you mind posting the model or other info on what you bought from Sudco? It sounds like it would be an exact match for my bike. Thx.
Doug

72 Penton 175 Jackpiner
92 Suzuki DR350
72 Honda CT70
71 Honda CT70H
70 Honda CT70H

tomale
I was kinda joking about the Dark Side thing. Some of the purists may not approve, but my bike's a rider, and I intend to use whatever will work the best. The original style choke is kinda hokey compared to a Mikuni. And it's not like I'm doing something to the bike that can't be easily returned to stock, should some future owner decide to do so.

I can't wait to show up at our favorite riding spot with the Jackpiner on the trailer. It should spark some interest and probably many comments from our riding buddies.

72 Penton 175 Jackpiner
92 Suzuki DR350
72 Honda CT70
71 Honda CT70H
70 Honda CT70H

Any idea what you are running for jet sizes and carb settings? Also what model Mikuni are you using?

72 Penton 175 Jackpiner
92 Suzuki DR350
72 Honda CT70
71 Honda CT70H
70 Honda CT70H

Rob W
Email sent. Did you get it?
Thx.
Doug

72 Penton 175 Jackpiner
92 Suzuki DR350
72 Honda CT70
71 Honda CT70H
70 Honda CT70H

Gary
Thanks for the reply. I'm traveling right now. I will give you a call when I get home and discuss my rebuild. I get over your way a couple of times a year, so dropping it off shouldn't be a problem.

Michael
Thanks a lot for the offer. I'm not quite ready right now, so you will probably finish the bike before I need to get the engine to Gary. But the offer is much appreciated.

I have to say that the guys on this forum are about the most helpful bunch I've ever seen. Thanks to everyone!

72 Penton 175 Jackpiner
92 Suzuki DR350
72 Honda CT70
71 Honda CT70H
70 Honda CT70H

Originally posted by rob w

quote:Thanks Doug,
I made the cable guide myself.
1/8" dia. wire.
If you're not up to it, I'd be happy to give/send you one.
Bob

That looks like something that I'd try to fab, and then end up with about 25 "prototypes" scattered over the workbench before finally getting one right!

No need to give me one for free. I'm willing to send you whatever you think's fair. I would like one, though. I like the idea of having the cable held tight and not moving around. I sent you an email with my address and contact info. Thx.
Doug
twosheds at dwx dot com

72 Penton 175 Jackpiner
92 Suzuki DR350
72 Honda CT70
71 Honda CT70H
70 Honda CT70H

Rob W
Beautiful bike. Where did you get the wire bracket for the brake cable on the front number plate?
Doug

72 Penton 175 Jackpiner
92 Suzuki DR350
72 Honda CT70
71 Honda CT70H
70 Honda CT70H

Thanks, Keith.
I looked al Al B's web site, and I see no bushings there.
It's off the eBay and cross my fingers!

72 Penton 175 Jackpiner
92 Suzuki DR350
72 Honda CT70
71 Honda CT70H
70 Honda CT70H

quote:Originally posted by Keith Meatyard

Just measured a brand new pair that I bought from Al B for my 73.
ID =.550, OD =1.064, inner L =1.130, outer L =1.970.

Keith Meatyard

Keith
Is the inner L= a typo? Maybe should be 2.130?
Doug

72 Penton 175 Jackpiner
92 Suzuki DR350
72 Honda CT70
71 Honda CT70H
70 Honda CT70H

Keith
Did you buy them recently? I tried to buy some from him a few months ago and was told they weren't available any longer. Hence my interest in these. I'd rather support Al, though.
Doug

72 Penton 175 Jackpiner
92 Suzuki DR350
72 Honda CT70
71 Honda CT70H
70 Honda CT70H

I was able to get one for my 175 from these guys in Italy:

http://www.pillondorino.com/

I don't read Italian, so Parmabike from Florida helped out and ordered it for me:


http://stores.ebay.com/Vintage-Moto-Parts?_trksid=p4340.l2563

Give him a call or email.

72 Penton 175 Jackpiner
92 Suzuki DR350
72 Honda CT70
71 Honda CT70H
70 Honda CT70H

I sent an email to the seller. We'll see if he will reveal who's Best in the Business.

72 Penton 175 Jackpiner
92 Suzuki DR350
72 Honda CT70
71 Honda CT70H
70 Honda CT70H

Thanks for the link and info.
I know exactly what you mean by "eye lid", as I still have the original chrome ring, and it is of the same type. Unfortunately, someone drilled a bunch of holes in it to mount a CT70 Honda headlight unit in it, and ruined it. I'd like an original, but a Vespa part might have to do.
I'll get ahold of NAPA and try to pick up one of the lamps.

72 Penton 175 Jackpiner
92 Suzuki DR350
72 Honda CT70
71 Honda CT70H
70 Honda CT70H

Kevin
Don't want to redirect this thread, but I have a speedo bucket like the one in this thread, and I'd sure like to find a new lens and chrome ring for it. Any idea where to get replecement parts? Thx.
Doug

72 Penton 175 Jackpiner
92 Suzuki DR350
72 Honda CT70
71 Honda CT70H
70 Honda CT70H