Messages

Kevin thks .. I am aware of the 40-404... did anyone say what the reason was  to plug the 3 holes and I assume they cut the halfmoon in. I was thinking leaving holes open and just cutting in halfmoon.. BT

Brian Taylor

The Hodaka Challenger is a Sprite frame and components .... I have one  if you want a picture I can post to the Facebook page ... BT

Brian Taylor

The Hodaka Challenger is a Sprite frame and components .... I have one  if you want a picture I can post to the Facebook page ... BT

Brian Taylor

Perfect thks Bob

Brian Taylor

Penton on a Kawi......to me......sad


Brian Taylor

cal I have a friend who has 3 extra don't know condition....if interested email me off site and i will hook yous up...isdt75ATyahoodotcom

Brian Taylor

Bob I see the Pic ....BT

Brian Taylor

Ive got 1 also ... Whats the fix or what do we do to rectify .... other than trying to track down 1 in good condition ?

Brian Taylor

Of the clutches I have done ( and not all Sachs clutches ) it happens quite often. the picture you show does seem to be a bit extreme though IMHO.....

Brian Taylor

You need to start with the gear  then  place the hub on it as pictured then build up the plates, springs and capscrews when all assembled pull out the hub  


Brian Taylor

Picture was from an Alouette / Sachs repair Manual

Brian Taylor

Its probably stuck around the bushing  shown as 6 and 7 .... If pulling in the clutch without the case screws dosent work ....Heat it up and use a rubber mallet to move it along


Brian Taylor

I think Mike is in Oregon








Mike BudschatýFans of Hercules-Sachs and Zuendapp,s

4 mins ·
.


I have a complete 6D DKW engine for sale.Runs with ignition.No broken fins and case is nice.This engine I think is a 74?It was in a DKW and put in a Monark while his engine was being rebuilt.It even has the 6D ignition cover which looks like new.850.00 plus shipping


Brian Taylor

Thks guys .......

Brian Taylor

Shipping is a bargin though.........

Brian Taylor